LEGRAND Luxul SW-510-48P-F User Manual

Managed PoE Switch Setup Guide
Setting up your Switch:
Place your switch in a
rack or on a desktop
Connect one Ethernet cable from your router or
other switch to any port on the switch. Connect
the included power cable from your switch to your
power source
NOTE: Your switches boot time will be a minimum
of 60 seconds
3.
1.
2.
Router or
Switch
Front Back
The default IP address method for your switch is via DHCP with a fixed
failover of 192.168.0.4. Please locate your switch IP address using your
Router’s Connected Client list or similar function. Using the IP address
that you find there, login with the default credentials.
User Name: admin
Password: admin
NOTE: If your computer or device isn’t set to obtain an IP address
automatically, you’ll need to set a temporary static IP address on
that device. Set the IP address of your computer to an address in
the 192.168.0.X range and set your subnet mask to 255.255.255.0.
You can leave the default gateway/router IP address blank.

LEGRAND Luxul SW-510-48P-F Specifications

General

Brand	LEGRAND
Model	Luxul SW-510-48P-F
Category	Switch
Language	English

Summary

Switch Setup and Initial Configuration

Physical Switch Placement

Instructions for positioning the network switch on a rack or desktop.

Network and Power Connections

Connecting the switch to your router/switch and power source.

Default IP Address and Login

Locating the switch IP, using default credentials, and setting static IP.

Switch Management and Information

Factory Reset and Restart Procedures

Steps to restore factory default settings or restart the switch.

Advanced Configuration Notes

Guidance on performing advanced configurations and saving settings.

LED Status Indicators

Explanation of the status lights on the network switch for various functions.

PoE Power Budget

Information on the power budget for PoE-enabled switch models.