LEGRAND 882 10 - Learn Scenario Procedure; Steps for Learning Scenarios; Modifying a Scenario; Steps for Scenario Modification

13



Press LEARN
Press LEARN
Press LEARN
Press the control key that is to
control the scenario
Press the control key that is to be
associated with the leader


Step 2: Add an actor to the scenario (on the ACTOR)
Learn scenario
The indicator lamps of all products go off
The scenario is saved
Step 1: Start the learn phase (on the LEADER)
Step 3: Save the scenario (on the LEADER)
To add a number of products to the scenario, repeat operations  and  for each actor
Key
The indicator lamp
goes off
The indicator lamp
blinks slowly
The indicator lamp
blinks quickly
The indicator lamp
flashes
14




Modifying a scenario
Press LEARN
Press LEARN
Press LEARN
Press LEARN
Press the control key
that controls the scenario
The indicator lamps of all the products
in the scenario blink
Press the control key
that is to be associated
Step 1: Open the scenario (on the LEADER)
or
To remove the product from
the scenario, go to step 3
Step 2: Modify the state of an actor in the scenario (on the ACTOR)
The indicator lamps of all the products go off
The scenario is saved
Step 3: Save the scenario (on the LEADER)