Need help?Do you have a question about the LEGRAND IME NEMO D4-ec and is the answer not in the manual?
General| Product Type | Power distribution unit |
|---|---|
| Brand | Legrand |
| Model | IME NEMO D4-ec |
| Number of outlets | 4 |
| Current rating | 16A |
| Voltage rating | 230V |
| Frequency | 50/60Hz |
| Protection degree | IP20 |
| Mounting | DIN rail |
| Material | Plastic |
Warnings about electrocution, burns, explosion, and device damage due to incorrect voltage/frequency.
Essential checks upon receiving the device to ensure safety and correct product.
Covers LED, keypad, display, and basic identification/technical specs.
Covers proximity warnings, terminal connection, torque, and wiring precautions.
Visual representation of device wiring and error prevention.
Diagrams for connecting RS485 and MBUS communication interfaces.
Explanation of how to navigate menus and use function keys.
Displays phase, linked, min/max voltages, THD, frequency, and hour counters.
Shows phase, average, peak currents, THD, and phase angles.
Displays three-phase, phase powers, distortion power, power factor, and demand.
Displays peak power values for tariffs and the load curve.
Displays total, phase, and tariff-based energy consumption.
Instructions on how to reset specific parameters using the 'Set' key.
How to enter setup, modify address, password, and other parameters.
Configuring communication parameters and time-related settings.
Procedures for modifying device address and password.
Steps to modify baud rate and save configuration changes.
Explains Modbus/MBUS logic, syntax, and compliance.
Correct sequence for connecting voltage and current phases.
Physical dimensions, terminals, protection, and voltage/current measurement specs.
Environmental conditions, CE marking, and EMC compliance.
Details on insulation specifications and impulse withstand voltage.
Information on PMD type, classification, performance classes, and measurement ranges.
Summaries of case, connections, display, power, and accuracy specifications.
Specifications for digital inputs and environmental operating conditions.
Compliance with EMC, CE marking, and insulation standards.
To Next Page
