8
• The intended use and congurations envisaged for the equipment are the only ones allowed by the Manufacturer;
do not attempt to use the equipment in disagreement with the indications given. Any other use or conguration
must be agreed and written by the Manufacturer, in such a case, will be an enclosure to the manual.
• For its use the user must also comply with the specic laws in force that exist in the country where the equipment
is installed. Reference is also made in this manual to laws, directives, etc., that the user must know and consult in
order to full the purposes established by the manual.
• If information is exchanged with the Manufacturer or assistance personnel authorized by the former, please refer
to the equipment’s rating plate data and serial number.
• The manual must be kept for the equipment’s useful life cycle and, if necessary (e.g. damage which prevents it
being consulted even partially) the user must ask the Manufacturer for a new copy, quoting the publishing code
on the cover.
• The manual reects the state of the art at the moment the equipment was put on the market, of which it is an
integral part. The publication complies with the directives in force at such a date. The manual cannot be considered
inadequate if updates of standards or changes are made to the equipment.
• Any integration to the manual which the Manufacturer deems tting to send to the users must be kept with the
manual, becoming an integral part of it.
• The Manufacturer is available to its clientele to provide additional information and will take into consideration
any suggestions made to improve this manual to bring it even closer to the requirements for which it was drawn
up.
• If the equipment is sold, which always includes handing over this operating manual, the primary user must
notify the Manufacturer, giving him the address of the new user so the latter can be reached if there are any
communications and/or updates deemed indispensable.
Read the manual completely before working on this equipment!
Keep this manual in UPS’s front cover’s pocket for easy consultation!
Reproduction, adaptation, or translation of this manual is prohibited without prior written
permission of LEGRAND Company, except as allowed under the copyright laws.
The manufacturer reserves the rights to change the technical specications and design
without notice.
LEGRAND reserves the rights to change the information in this document without notice.
Refer to http://ups.legrand.com/ web site to download last release and translations.
Units that are labelled with a CE mark comply with the Standard: EN 62040-1 and EN 62040-2.
To Next Page
Loading...
Need help?
General