Light sensitive switch
037 25
The values given in this list must be reduced by 20% for each 10 °C above 25 °C.
Technical specifications
Principle
This device controls lighting, or another load,
automatically, according to a set level of light.
To avoid unwanted switching, the output switches
5 seconds after detection.
2000 VA,
series compensated
300 VA,
parallel compensated
at 45 µF
14
Number of fluorescent tubes permissible.
- Power supply : 230/240 V AC - 50/60 Hz
- Switch : 10A - 250 V AC µ - Cos
φ = 1
- Sensitivity 0,5 to 2000 lux
- Terminal capacity : 2 x 1.5 mm
2
- Storage and operating temperature range : -25 °C to +60 °C
- Diameter of conduit on cable entring : 4 to 15 mm (IP 55 - IK 07)
- Reaction time of relay to light level changes is about 5 seconds
Technical specifications (continued)
Tube Uncompensated Series compensation Parallel compensation
Ø38 - 65 W 18 30 4
Ø38 - 40 W 28 50 7
Ø26 - 58 W 20 35 5
Ø26 - 36 W 30 55 8