Need help?Do you have a question about the LEGRAND Niky S 1 kVA and is the answer not in the manual?
General| Apparent Power | 1 kVA |
|---|---|
| Active Power | 600 W |
| Technology | Line Interactive |
| Input Voltage | 230 V |
| Output Voltage | 230 V |
| Frequency | 50/60 Hz |
| Efficiency | 95% |
| Operating Temperature | 0-40 °C |
| Weight | 10 kg |
| Battery Type | Sealed lead-acid (SLA) |
Automatic self-test performed on startup for reliable operation.
Tests battery function and manages operation, indicating status.
Allows audible alarms to be silenced by pressing the ON button.
Enables the UPS to be switched on while operating in DC mode.
Provides AVR for stabilized output voltage, even with mains fluctuations.
Includes automatic switch-off for short circuits.
Manages battery discharge under no load to conserve battery life.
A dedicated filter eliminates electromagnetic and radio frequency interferences.
Outlet offering surge protection for non-backup devices like printers.
Allows UPS monitoring and control via computer through USB/RS232.
Integrated RJ11/RJ45 protection for telephone/network equipment.
Details physical attributes like weight and dimensions for different models.
Specifies operating conditions such as temperature and humidity range.
Covers rated input voltage, frequency, and maximum input current.
Describes the shape of the output electrical signal during operation.
Identifies the UPS operational mode as line interactive.
Details output voltage, active/apparent capacity, and overload limits.
Information on operating time at 80% load and battery charging time.
Lists compliance with electromagnetic compatibility and safety standards.
Identifies LEDs, buttons, and indicators on the UPS front panel.
Details ports, sockets, and DIP switch configurations on the rear panel.
Explains the function and settings of various DIP switches.
To Next Page