LEGRAND Valena Next - User Manual

Cat. Nos: 7 418 08/38/68
Technical data sheet: F02773EN/01 Updated: 28/06/2022 Created: 29/11/2018
1/2
Valena
TM
Next
Connected wireless control for roller shutters
and orientable sun shades
128, av. du Maréchal-de-Lattre-de-Tassigny - 87045 LIMOGES Cedex
Tel.: 33 (0)5 55 06 87 87 - Fax: 33 (0)5 55 06 88 88
www.legrand.com
4. OPERATION
5. TECHNICAL CHARACTERISTICS
 5.1 Mechanical characteristics
Protection against impacts: IK 02
Protection against solid bodies/liquids: IP 20 without plate and rocker plate
IP 40 for assembled product
 5.2 Material characteristics
Plates: - ABS White (RAL 9003) polyglass appearance
- ABS painted satin appearance for other colors
Subplate: opalescent white PC
Mechanism with grid: Fibreglass-reinforced (10%) PC
Halogen-free
UV-resistant
Self-extinguishing: 650°C/30 s
 5.3 Electrical characteristics
Powered by a CR2032 - 3 V lithium battery (supplied)
Battery life: 8 years for 10 activations a day
ZigBee radio technology
Frequency: 2.4 GHz to 2.4835 GHz
Power level: < 100 mW
 5.4 Climate characteristics
Usage temperature: +5°C to +45°C
Storage temperature: 0°C to +45°C
1. USE
Zone or centralised control for wired roller shutters and orientable sun
shades switches.
• Fixes directly on the wall or screws onto a flush-mounting box.
Multi-gang versions can be combined with other wiring accessories.
• Fits on a piece of furniture (movable).
Can control up to 20 roller shutters switches.
3. DIMENSIONS (mm)
2. RANGE
B
A
C
A B C
83 83 12
LED indicator:
- useful during installation
- when pressed, burst flashes red if the battery
power is low
Down when pressed at the bottom:
- short press lowers to the bottom
- long press lowers until released
- OSS mode: long press tilts slats
Up when pressed at the top:
- short press raises to the top
- long press raises until released
- OSS mode: long press tilts slats
RESET button used to return to factory settings
Description White Alu Black
Connected wireless control for roller shutters and orientable
sun shades (OSS).
Supplied complete with battery.
Equipped with an LED indicator (configuration) and a RESET
button (hidden) used to return to factory settings.
Repositionable self-adhesive fixings supplied.
7 418 08 7 418 38 7 418 68
STOP

Summary

Product Use and Installation

1. USE

Zone or centralised control for wired roller shutters and orientable sun shades. Fixes directly on wall or flush-mounting box. Controls up to 20 roller shutters.

Product Range and Features

2. RANGE

Connected wireless control available in White, Alu, Black. Supplied with battery, LED indicator, and RESET button. Includes self-adhesive fixings.

Product Dimensions

3. DIMENSIONS (mm)

Provides dimensions A, B, and C for the device, measuring 83mm, 83mm, and 12mm respectively.

Product Operation Guide

4. OPERATION

Describes button functions for raising/lowering and OSS mode. Includes LED indicator behaviour and RESET button function.

Technical Specifications

5.1 Mechanical characteristics

Details impact protection (IK 02) and ingress protection (IP 20/IP 40) for the assembled product.

5.2 Material characteristics

Lists materials for plates, subplate, and mechanism, including ABS, PC, and fibreglass reinforcement.

5.3 Electrical characteristics

Specifies power source (CR2032 battery, 8-year life) and ZigBee radio technology (frequency, power level).

5.4 Climate characteristics

Outlines usage (+5°C to +45°C) and storage (0°C to +45°C) temperature ranges.

Product Care and Accessories

6. CARE

Instructions for cleaning surfaces with a cloth, listing resistant products and forbidden agents like acetone.

7. ACCESSORIES

Lists accessory 0 648 71 as repositionable adhesive for wireless control, which is supplied with the product.

Standards and Approvals

8. STANDARDS AND APPROVALS

States the declared compliance with directive 2014/53/EU for the radio-electric equipment type.

LEGRAND Valena Next Specifications