a low-impedance output, which is thus insensitive
to sound losses caused by over-long cable runs.
The full sound quality stays in the signal even at
cable runs of 20 meters and more.
What to do:
1. Connect your instrument to the Input socket (1)
of the Lehle Sunday Driver.
2. Connect a long cable from the Send socket (3)
of the Lehle Sunday Driver to the amplifier
input.
3. Switch the S/D selector (2) in the D position, for
“Driver“.
4. Turn the Gain controller (5) to the left limit (“7
o’clock position“).
5. Done!
The Lehle Sunday Driver as a line driver
Electric guitarists and bassists like to use a large
range of effects switched one after the other, to get
exactly the sound they want. There is, however, a
danger here that the signal will lose clarity, treble
and pressure significantly due to the array of ef-
fects. With long cable runs and the large number
Device connection
Input (1) Instrument
Output (3) Amplifier (long cable)
9
To Next Page
Loading...
General