Lehle Sunday Driver to fix it to a base plate (or
to a pedal board, for example).
Tip: in case you prefer a velcro solution for your
pedalboard we recommend to write down the
serial number of the pedal before covering it for
eventual support matters.
Thanks to its ready-to-go fixing system, the Lehle
Sunday Driver can be mounted without difficulty
on a base plate.
To do this, undo the four housing screws and de-
tach the cover. Then fix the device base to a base
plate using the two screws, the washers and the
spacers supplied. Replace the cover and tighten
the four housing screws - done!
Typical uses
The Lehle Sunday Driver’s universal proper-
ties make it equally suitable for live use on stage
and in the concert hall, and for studio recording
sessions. The following few pages show a number
of typical applications in which the Lehle Sunday
Driver is a rational addition to your gear!
7
To Next Page
Loading...
General