Lehmannaudio Manual Black Cube Linear - page 11 -
_______________________________________________________________________________________________________________
Technical Data:
Input impedance: 47kOhm
Maximum gain: 0dB, 10dB, 18dB, 20dB
Switchable underneath the unit
Frequency response: 10Hz (-0,3dB) - 35kHz (-1dB)
Signal to oise ratio: >95dB @ Gain 0dB
THD: <0,001% @ 6mW/300 Ohm
Channel separation: >70dB/10kHz
Interchannel mismatch: <0,3dB with volume to maximum
Output power: 300 Ohm /200mW
60 Ohm /400mW
Output imedance: Line Out 50 Ohms
Phones Out 5 Ohms
Connectors audio: Neutrik headphone jacks (6,35mm) with gold plated
contacts. 1x muting (line out) 1x parallel.
RCA connectors with gold plated contacts and
Teflon isolation
Mains connector: IEC receptable
Fuse: 100 – 120V AC 500mA slow or T
200 – 240V AC 250mA slow or T
Power consumption: <10W with internal regulated low noise power supply
Dimensions: 280 x 110 x 44mm³ (case only)
Weight: app. 1,5kg
To Next Page
Loading...
