Need help?Do you have a question about the Lehmannaudio Silver Cube and is the answer not in the manual?
Overview of the Lehmann audio Silver Cube phono stage and its capabilities.
Instructions for safely installing the Silver Cube, avoiding water and heat exposure.
Critical safety advice before cleaning or servicing the Silver Cube and its power supply.
Congratulatory message and introduction to the Silver Cube's features and purpose.
Details specialized operational amplifiers, RIAA filter network, and FET output stage.
Details toroidal transformer, filtering, voltage selection, and connectors for the power supply.
Details WBT Nextgen RCA input connectors and termination switch configurations.
Explains gain adjustment switches and RIAA filtered line level output connectors.
Instructions for connecting the external power supply and keeping it away from the audio section.
Guidance on connecting the turntable's separate ground cable.
Table showing gain settings (MM/MC, Lo/Hi) and their corresponding dB outputs.
Table detailing capacitance and impedance settings for cartridge adaptation.
Contact information and web address for Lehmann audio Vertriebs GmbH.
General| Type | Headphone Amplifier |
|---|---|
| Frequency Response | 10 Hz - 100 kHz |
| Maximum Gain | 20 dB |
| Signal to Noise Ratio | > 100 dB |
| Power Consumption | 15 W |
| Input capacitance | 100 pF |
| Power supply | External Power Supply |
| Input Impedance | 10k Ohms |
| Headphone Output | 6.3 mm |
| Total Harmonic Distortion (THD) | <0.001% |
To Next Page
