W A R N I N G: You must not connect the output cables from the Silver Cube to a following phono input
because the RIAA-filtering and amplification would be done twice! You could damage the following
phono stage or your power amplifier and loudspeakers! The resulting noise could even damage your
hearing!!!
5. Connector for external power supply
Please use only the cable supplied with the unit.
Please connect always the power supply to the audio section first and then connect the
complete unit to mains voltage! Keep the power supply at least 0,5m from the audio
section to avoid magnetical interference (hum).
6. Ground-Connector
If your turntable has a separate ground cable you should connect it here. You can connect open ends or
cable shoes.
To Next Page
Loading...
