Group 7 Data/Programming Page 138
Release R2.0 LEIBINGER JET3
2.1 Licence key input is correct:
The additional information in the display field <Licence key status> (3) changes
and all input blocks of the setting field <Licence key> (4) are blocked.
No other or new licence key can be entered!
2.2 Wrong licence key or input is faulty:
The additional information in the display field <Licence key status> (3) stays
unchanged and the carried out input is still apparent.
By clicking again in the 1. input block (4.1) of the setting field <Licence key>
(4) all inputs are deleted and a key can be entered again.
3. Input of the Host PC IP-address (Step 3):
That a connection between the LEIBINGER JET3 and the connected PC can be
realized, it is necessary to register its IP-address.
Press (if required) on the tab <Remote screen> (2) to select the tab.
Now click in the setting field <Host PC IP-Address> (3) on the requested
address block (4). A numeric keypad (6) opens for input in which you can enter
the required value.
Now carry out the settings for every further address block accordingly.
Press the button <OK> (5) to save the registered IP-address.
You will find further information regarding the work with Numeric
keypads in the chapter Numeric keypad!
After storage it is not necessary anymore to enter the IP-address
again for a further connection establishment as long as you work
with the same PC!
To Next Page
Loading...
