Group 1 Introduction Page 14
Release R2.0 LEIBINGER JET3
The manual must be read thoroughly prior to first start up in order to ensure
that no damage to the device and/or endangering of the operating
personnel results from a defective electrical connection and/or from
incorrect operation.
Please pay particular attention to the safety instructions of the groups
Safety instructions and accident prevention when handling consumables
(ink and solvent).
Our devices are subjected to a quality control in our plant prior to delivery. If despite this
the device or parts of it should be damaged or their function disturbed please advise us
of this as fast as possible.
It is only through the use of inks and solvents from Paul Leibinger GmbH & Co. KG that
optimum operating characteristics can be achieved. Should other inks and solvents be
used all warranty claims will expire.
No alterations whatsoever must be carried out on the entire LEIBINGER
JET3 device. No liability will be accepted for damage or dangers resulting
from inadmissible alterations.
Danger of explosion!
The device should be only operated outside of explosive areas!
The installation has to be carried out according to the installation
instructions of the manufacturer!
To Next Page
Loading...
