Leibinger Jet 3 - Intended Use of the JET3 Printer

Group 2 Safety instructions Page 16
Release R2.0 LEIBINGER JET3
2. Safety
2.1 Scope of risks
The high performance industrial printer LEIBINGER JET3 has been built in accordance with
state-of-the-art standards and recognized safety requirements and has been equipped with
protective devices.
The InkJet-printer works with flammable liquids which are ink and solvent.
At incorrect usage or misuse may result in danger of health of the operator or further
people, as well as property damages.
All persons, which are entrusted with the initial operation, commissioning, operating,
service and maintenance must be specifically trained and qualified about the handling with
ink and solvent.
Before the first usage of the printer in particular the operating manual as well as the
safety data sheets of the ink and solvent have to be read and noted.
Operational and safety checks of the installation were carried out before it left the factory.
In case of improper handling or misuse, however, there are dangers for
 the health of the operating staff
 the high performance printer JET3 and other real assets of the plant operator
 the efficient operation of the high performance printer
All persons entrusted with the putting into service, the operation, the maintenance and
the overhauling of the high performance printer must
 have the necessary qualification and
 strictly comply with this operating manual.
YOUR safety matters!