Group 2 Safety instructions Page 20
Release R2.0 LEIBINGER JET3
Only trained personnel must operate the device. The personnel must have the
corresponding mechanical and electrical training to operate the inkjet printer
professionally. The operator is responsible for third parties in the working area of the inkjet
printer.
The owner-operator must make this operating manual accessible to the printer operator
and has to ensure that the operator has read and understood it.
Personnel in training can work on or with the inkjet printer only when supervised by an
experienced operator.
2.6 Dangers due to electric energy
The electrical and electronic components of the high performance printer
are under voltage. The device must only be opened by trained personnel
or by Leibinger service technicians.
Prior to the opening of the device the device must be switched off and the
mains plug removed.
2.7 Personal protective equipment
The inkjet printer processes materials that cause irritation and are under
pressure. To prevent injuries and damage, the personnel must wear the
following suitable personal protective equipment when carrying out certain
tasks:
Working clothes
Safety glasses
Safety gloves
The personal protective equipment must be provided by the owner-
operator. Please consult the corresponding chapters of the operating
manual as well as in the safety data sheets of the consumables for more
information.
To Next Page
Loading...
