The inkjet printer does not have a power switch. For maintenance the
printer must be disconnected from the mains.
Always connect the inkjet printer to an easily accessible outlet in close
proximity to the installation site!
The printer has to be assimilated to the check list about the regular
examinations according to the employers’ liability insurance association-
guideline.
Operate the inkjet printer only outside of explosive atmospheres in a well-
ventilated area!
Inside the printer solvents are processed; ensure sufficient ventilation! The
operator has to ensure that the MAK-values noted on the safety data
sheets won’t exceed.
The printer ventilation must not be impaired; do not cover or close the
ventilation gills on the back panel of the printer.
Place the printer with enough distance to any wall (recommended minimum
distance 0,3 m).
Ensure about sufficient space of the installation location of the printer and
enough space to ensure a safely handling of ink and solvent.
Keep the inkjet printer away from any sources of heat, flame, or sparks
(e.g. space heater).
The inkjet printer must be integrated into the lightning protection system
of the owner-operator!
Protect the inkjet printer from electrostatic charges!
Keep suitably extinguishing medium available.
To Next Page
Loading...
