Leibinger Jet 3 - Transport and Initial Setup; Transport, Storage, and Shipping Guidelines; Device Mounting Procedures

Group 4 Technical data Page 34
Release R2.0 LEIBINGER JET3
4.6 Fonts
All fonts can be combined arbitrarily
Printing of 1-5 lines
Tower print
Capitals and lower case letters, umlaut, special
characters
Fonts 5x5 up to 32x24
Multistage contrast- and bold text
All common Barcodes (Barcode 39, Code 128C, Postnet
etc.) and Data-Matrix-Codes (ECC 200), GS1-Data-
Matrix (EAN/ECC)
4.7 Types of writing
Double distance
Texts backwards
Symbols mirror-inverted
Symbols mirror-inverted and upside down
Symbols mirror-inverted, upside down and text
backwards
Alternating readable font, reverse, bold text, inverse
4.8 Font combinations
All fonts can be presented in one writing in the
requested matrix.
4.9 Function
Full automatic function by:
 The automatic nozzle seal guarantees that the print
head is ready to print immediately after starting.
 Automatic, electronic drop control for compen-sation
of changing ambient- and operating temperatures
 Automatic viscosity control
 Splash-free re-filling of ink and solvent during the
printing operation