Group 6 Operation – Elements and procedures Page 74
Release R2.0 LEIBINGER JET3
The characters are entered with the keyboard. The structure of the keyboard
corresponds to the common computer keyboards.
Note: Depending on the installed language package (e.g. Cyrillic) the structure can
vary from the shown display.
With the button <Return > (1) the input is taken over and the Numeric keypad will
be closed.
With the button <Special characters> (2) you can change between the standard
characters and the special characters.
6.5 Basic operating processes
This paragraph describes the basic operating processes of the LEIBINGER JET3.
The complete control of the JET3 can be carried out with a connected PC-mouse or
directly with the TFT-Touch-Display.
For the operation with the Touch-Display the control of the device happens by a slight
touch on the buttons (touch-fields) with the finger or with the touch pin (included in
the delivery). Here the targeted precision is decisive and not the pressure.
The operation with the touch-display is described subsequently.
Accidentally touching can release unintentional device conditions.
To Next Page
Loading...
