Group 6 Operation – Elements and procedures Page 77
Release R2.0 LEIBINGER JET3
6.5.3.2 Switching on with password protetction
Touch the dark Touch-Display (1) at any point. Period of touching approx. 2 sec..
The device turns on and the main menu (3) is displayed with the message
<Initialization> (2).
After the initialization the device starts with the bleeding of the system
automatically.
During the process the message <Bleeding> (4) is displayed. The bleeding takes
between 1 – 5 min. The process can be canceled by pressing the button
<Cancel> (5).
Note: The start of the device happens in the logged-out status (no operator will
be logged on) but the job which has been used at last will be loaded
automatically.
The dialog field <Current login> (6) and a keyboard field (8) is faded in.
You will find further information regarding the operation with
keyboard in the chapter Keyboard!
Enter your password with the keyboard field.
Press the button <Enter> (9) of the keyboard field to finish the input.
Now press the button <Login> (10) to finish the login.
Now the user is logged-in and the active password level is displayed on top right
of the title bar (11).
The login can be also carried out without a password. In this case
only several basic functions of the device are available for the user.
In this case the last active password level is logged-in.
You will find further information in the chapter Password protection!
To Next Page
Loading...
