Need help?Do you have a question about the Leica DISTO D810 touch and is the answer not in the manual?
General| Brand | Leica |
|---|---|
| Model | DISTO D810 touch |
| Category | Analytical Instruments |
| Language | English |
Safety instructions and user manual should be read carefully before use.
Diagram illustrating the main components and buttons of the Leica DISTO D810 touch.
Explanation of the viewscreen, zoom, and crosshair for precise targeting.
Instructions on how to charge the device's battery using a USB connection and status indicators.
Guidelines for operating the device via its touch screen, including tapping, dragging, and pinching.
Procedure for turning the device on and off, including automatic switch-off.
Instructions on how to clear the last action or exit the current function.
Explanation of how to interpret and act upon message codes displayed on the device.
Description of the endpiece and how its orientation is automatically detected.
How to perform continuous or min/max distance measurements.
Steps for adding or subtracting measurements, applicable to distances, areas, or volumes.
Using the pointfinder camera for outdoor measuring with zoom and crosshair.
How to take a screenshot of the device display, which is saved in the gallery.
Overview of the device settings menu and available configuration options.
Setting the units for displaying tilt measurements in degrees, percentage, or mm/m.
Configuration of measurement units for distance, including metric and imperial options.
How to enable or disable audible beeps for device operations.
Turning the digital level feature on or off, which displays inclination in the status bar.
Procedure to lock or unlock the device's keypad to prevent accidental input.
Instructions on how to turn on the device when the keylock is active.
Configuration of Bluetooth connectivity for data transfer and device pairing.
Step-by-step guide to calibrate the tilt sensor for accurate angle measurements.
Setting up custom shortcuts for frequently used functions for quick access.
Adjusting the screen brightness for better visibility and power saving.
Setting the current date and time on the device.
Adjusting the magnetic declination for accurate compass readings based on geographic location.
Procedure to enable or disable the touch screen functionality.
Setting an offset value to add or subtract from all measurements.
Instructions for resetting the instrument to factory settings, including hardware reset.
List of all available measurement and calculation functions on the device.
Using the timer function with adjustable release times for delayed measurements.
Using the built-in calculator for further calculations with measurement results.
Configuring the measurement reference point (front, rear, tripod).
Managing stored measurements, including switching between, deleting, and taking over values.
Procedure for taking a single distance measurement with the laser.
Utilizing smart horizontal mode for angled measurements and tracking.
Using the device as a digital level to display inclinations and perform adjustments.
Calculating the area of a surface by measuring two or three points.
Calculating the volume of a space by measuring three dimensions.
Taking photos and using the pointfinder camera for screenshots or overview.
Using the built-in compass to determine direction and checking for interference.
Procedure to calibrate the compass for accurate readings after device startup.
Accessing and managing photos and screenshots stored on the device.
Calculating the area of a triangle by measuring three points.
Using long range mode for measurements in difficult conditions with increased time.
Measuring height differences to a reference point or terrain profiles.
Measuring distances, angles, and heights of sloped objects indirectly.
Tracking height and angle of objects without reflective targets using pointfinder.
Calculating the area of a trapezoid by measuring specific points.
Using the stake out function to mark defined lengths or points.
Calculating an unknown side of a right-angled triangle using two measurements.
Calculating an unknown side of a right-angled triangle using three measurements.
Measuring the width of an object by aiming perpendicularly to it.
Measuring the diameter of a round object by aiming perpendicularly.
Calculating area from an image captured by the device.
Defines responsibilities of the manufacturer and the user regarding product use and safety.
Lists prohibited actions and uses of the device to prevent hazards and damage.
Specifies the designed usage environments and limitations for the device.
Instructions for proper disposal of the device and its batteries according to regulations.
Information on the device's compliance with EMC standards and potential interference.
FCC compliance statement for digital devices, including interference guidelines.
Safety precautions and warnings regarding electromagnetic radiation from Bluetooth®.
Details about the device's laser class (Class 2) and associated safety measures.
Explanation of the laser warning labels and symbols on the device.
To Next Page
