Need help?Do you have a question about the Leica Disto X310 and is the answer not in the manual?
General| Wavelength | 635 nm |
|---|---|
| Laser class | 2 |
| Measurement range | 0 - 120 m |
| Measurement accuracy | ±0.001 m |
| Lowest indication unit | 0.1 mm |
| Backlight | Yes |
| Battery type | AAA |
| Battery voltage | 1.5 V |
| International Protection (IP) code | IP65 |
| Operating temperature (T-T) | -10 - 50 °C |
Weight and Dimensions| Weight | 155 g |
|---|---|
| Dimensions (WxDxH) | 122 x 55 x 31 mm |
General safety and purpose for setup procedures.
Identification of device components and their functions.
Details of the device's screen icons and indicators.
Procedure for correctly inserting the power source.
Basic control of device power for activation and deactivation.
Function to reset current operations or modes.
Configuring the starting point for accurate measurements.
How to utilize the device's versatile endpiece for various measurements.
Customizing the display units for distance measurements.
Customizing the display units for angle measurements.
Using the delayed measurement function for stability.
Enabling or disabling sound feedback for operations.
Adjusting the screen brightness for visibility.
Preventing accidental key presses by locking the keypad.
Basic procedure for measuring a single distance.
Continuous and extreme value tracking during measurements.
Performing calculations by adding or subtracting measured values.
Calculating the surface area of a space.
Calculating the volume of a space.
Measuring the area of a triangular shape.
Calculating height using three reference points.
Calculating height with fewer than three reference points.
Marking specific lengths on-site for layout.
Measuring horizontally with automatic tilt compensation.
Monitoring height changes when the device is on a tripod.
Viewing stored readings from the device's memory.
Deleting stored readings from the device's memory.
Step-by-step guide to calibrate the tilt sensor.
Defining roles for safe operation and maintenance.
Approved uses of the device according to safety guidelines.
Activities to avoid for safety and device integrity.
Risks associated with device operation and environment.
Constraints on device usage and operating conditions.
Guidelines for environmentally sound disposal of the device.
Device's compliance with standards regarding electrical interference.
Information on the laser's safety rating and potential risks.
Explanation of safety, compliance, and operational labels on the device.
To Next Page
