Need help?Do you have a question about the Leica DISTO X4 and is the answer not in the manual?
General| Type | Laser distance meter |
|---|---|
| Bluetooth | Yes |
| Display type | Digital |
| Product color | Black |
| Pointfinder zoom | 4 x |
| Bluetooth version | 4.0 |
| Distance measuring units | ft, in, m |
| Number of memory records | 20 |
| International Protection (IP) code | IP65 |
| Mobile operating systems supported | Android, iOS |
| Accuracy | 1 mm |
| Wavelength | 635 nm |
| Laser class | 2 |
| Storage temperature (T-T) | -25 - 70 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Maximum measurement distance | 150 m |
| Minimum measurement distance | 0.05 m |
| Battery type | AA |
| Battery technology | Alkaline |
| Auto power off after | 2 min |
| Battery life (measurements) | 4000 |
Weight and Dimensions| Depth | 56 mm |
|---|---|
| Width | 132 mm |
| Height | 29 mm |
| Weight | 188 g |
Covers Bluetooth® settings like navigation, decimal point, and unit transmission for data transfer.
Provides step-by-step instructions for calibrating the tilt sensor for accurate angle measurements.
Details the calibration process for the Leica DST 360 adapter for enhanced accuracy.
Explains how to reset the instrument to factory settings, noting that custom settings will be lost.
Guides on how to perform a single distance measurement, including aiming at the target.
Explains how to calculate area by multiplying two distances, including Painter function usage.
Details how to calculate volume by multiplying three distances, covering length, width, and height.
Describes how to calculate distance using the Pythagorean theorem with two right-angled triangles.
Explains how to measure heights using trigonometric functions with known length and angle.
Describes how to calculate tie distance based on two known coordinates (x,y,z) using the DST 360 adapter.
Explains levelled point-to-point measurement using the DST 360 adapter, requiring device levelling.
Describes how to calculate area based on several known coordinates, allowing up to 30 additional points.
Lists common error codes, their causes, and suggested corrections for troubleshooting the device.
Emphasizes user understanding of directions and adherence to safety, noting skilled person usage.
Defines permitted uses like measurements and prohibited uses like unauthorized modifications or misuse.
Warns about hazards like erroneous measurements due to defects and cautions against self-repair or unauthorized modifications.
Specifies limits of use, such as avoiding explosive areas, and defines responsibilities of manufacturer and user.
Explains Class 2 laser safety, advising against staring into the beam or using optical aids.
To Next Page
