Need help?Do you have a question about the Leica DISTO D2 and is the answer not in the manual?
General| Accuracy | ±1.5 mm |
|---|---|
| Units | m, ft, in |
| Laser Class | Class 2 |
| Laser Type | 635 nm, <1 mW |
| Protection Class | IP54 |
| Batteries | 2x AAA 1.5V |
| Dimensions | 116 x 44 x 26 mm |
| Battery Life | up to 10, 000 measurements |
| Operating Temperature | -10 to 50 °C |
| Storage Temperature | -25 to 70 °C |
| Weight | 100 g with batteries |
| Display | 3-line display |
| Range | 0.05 to 100 meters |
Instructions for inserting batteries into the device, recommending high-quality Alkaline batteries.
Procedure for turning the device ON and OFF, including visual indicators.
How to undo the last action or leave the current function to return to default mode.
How to set the measuring reference point from the front or rear of the device.
Explanation of how the endpiece orientation is detected and the zero point adjusted accordingly.
Instructions on how to switch between different measurement units like meters, feet, and inches.
Procedure to enable or disable the beep sound by pressing two keys simultaneously.
Step-by-step guide on how to measure a single distance using the laser device.
How to measure room diagonals or horizontal distances and stop the process.
Procedure for adding or subtracting measured distances, areas, or volumes.
Guide to calculating area by measuring two lengths and optionally a height.
Steps to calculate volume by measuring three lengths, including circumference and wall area.
How to display and navigate through the last 10 recorded measurement values.
Instructions on how to completely delete all stored measurements from the device's memory.
How to adjust the delay for automatic release, recommended for precise aiming.
Method for calculating height using two laser measurements to determine a right angle.
Method for calculating height using three laser measurements to determine a right angle.
How to mark out points at specified distances using the device's stake out feature.
Information on connecting and transferring data wirelessly using Bluetooth® Smart technology.
Details on the lifetime warranty coverage for products under PROTECT by Leica Geosystems.
Information on additional services and registration requirements for the '3 Years No Cost' period.
Explanation of warning symbols (WARNING, CAUTION) and informational symbols used in the manual.
Defines the allowed operations for the device, such as measuring distances and data transfer.
Lists actions and conditions that are not allowed when using the product.
Highlights potential risks like erroneous measurements due to defects or misuse.
Specifies environments where the device should not be used, like explosive or aggressive areas.
Details the responsibilities of the manufacturer and the person in charge of the instrument.
Instructions for proper disposal of flat batteries and the product, adhering to regulations.
Information on the device's compliance with EMC standards and potential interference.
Details compliance with FCC rules for Class B digital instruments and potential interference.
Precautions regarding electromagnetic radiation from Bluetooth® and its effects on equipment/people.
Details on the device being a Class 2 laser product, including safety warnings.
Information on device labels, including model, power, FCC ID, and safety symbols.
To Next Page
