Need help?Do you have a question about the Leica DISTO E7500 and is the answer not in the manual?
General| Accuracy | ± 1 mm |
|---|---|
| Laser Class | 2 |
| Display | Color Display |
| Connectivity | Bluetooth |
| Units | m, ft, in |
| Protection Class | IP65 |
| Battery Life | Up to 4000 measurements |
| Operating Temperature | -10 °C to +50 °C |
| Laser Type | 635 nm |
| Storage Temperature | -20°C to +70°C |
Safety instructions and user manual reading guidance for first-time use.
Diagram of the Leica DISTO™ E7500 device and its main controls.
Explanation of the main display elements during measurement.
Visual representation of the device's menu navigation screen.
Details on the viewscreen functionality for targeting.
Instructions for inserting batteries into the device.
Procedures for turning the device on and off.
How to undo the last action or return to default mode.
Guidance on interpreting numerical codes displayed by the device.
Explanation of the automatic detection and zero point adjustment of the endpiece.
How to perform continuous and min/max distance measurements.
Method for adding or subtracting measured distances.
Advanced usage of the viewscreen for outdoor measuring.
List of available settings and navigation to them.
Procedure for changing the measurement unit displayed.
Instructions for enabling or disabling audible beeps.
How to activate or deactivate the digital level display.
Steps to lock or unlock the device's buttons.
Procedure for turning on the device while the keylock is active.
Detailed steps for calibrating the tilt sensor for accuracy.
Setting up custom shortcuts for frequently used functions.
Adjusting the screen brightness for better visibility.
Setting an offset value to add or subtract from measurements.
Procedure to restore the device to factory default settings.
List of primary functions available on the device.
Using the timer function with selectable release times.
Setting the measurement reference point for different scenarios.
Managing stored measurements and viewing details.
Basic procedure for taking a single distance measurement.
Using the device for horizontal distance measurements.
Calculating surface area using measured distances.
Calculating volume using measured distances.
Using the device to mark off defined lengths.
Calculating distances using the 2-point Pythagorean theorem.
Specifications and tolerances for distance measurements.
Specifications for the Smart Horizontal Mode feature.
General specifications including laser class and protection.
List of supported functions and their availability.
Table listing error codes, their causes, and corrections.
Defines responsibilities of manufacturer and user.
Guidelines on how the product should be used.
List of actions that are not allowed with the product.
Warnings about potential risks and erroneous measurements.
Information on operating environment and restrictions.
Instructions for environmentally safe disposal of the product.
Compliance statement for digital devices under FCC rules.
Details on the laser class, wavelength, and safety precautions.
Explanation of the product's safety labels and compliance markings.
To Next Page
