Leica DISTO E7500 - Adjusting Measuring Reference

Leica DISTO
TM
E7500 820692
14
ENFunctions
Adjusting measuring reference/tripod
1
2
3
Distance is measured from the rear of the
device (standard setting).
Distance is measured from the front of the
device (lock symbol = permanently).
Distance is measured from the tripod
thread permanently.
Distance is measured from a Leica DISTO
Adapter FTA 360 (lock symbol = perma-
nently)
4
Confirm setting.
i
If device is switched off, reference
goes back to standard setting
(rear of the device).
If you use an original Leica DISTO
adapter, the reference does not
need to be adapted to tripod
thread!