Leica Disto X310 - Device Calibration; Tilt Sensor Calibration Procedure

Leica DISTO
TM
X310 788479a
16
ENCalibration
Calibration of tilt sensor (Tilt Calibration)
1
2 sec
simultane-
ously
2
Place device on absolutely flat surface.
3
180°
4
Turn the device horizontally by 180°
and place it again on absolutely flat
surface.
5
6
Place device on absolutely flat surface.
7
180°
8
Turn the device horizontally by 180°
and place it again on absolutely flat
surface.
9
i
After 2 sec
the device
goes back to
the normal
mode.