Leica Disto X310 How To Use

How to use Leica DISTO™ X310
Switch On and Off
 The red Dist on key displayed here switches on the instrument
and the laser in a single press.
 Pressing the Clear off button for 2 seconds switches the
instrument off. Also the instrument switches off automatically
after 3 minutes of inactivity.
Basic operations
Other Operations on the device
 Beep on/off – Press & keys simultaneously for 2 seconds.
 Illumination on/off – Press & keys simultaneously for 2
seconds.
 Keypad lock on/off – Press & keys simultaneously for 2
seconds to lock the keypad. To unlock, press within 2 seconds
after switching on the device or the device switches off on its own.
Adjusting measuring reference/tripod
Disto X310 is provisioned to measure the distance from the front, back or the tripod thread
of the device.
 Each time the device is switched on, the display shows the default or the standard
mode as which means that the distance is being measurement is from the back of
the device .
You can further change the setting by pressing to adjust the mode to either
 - Measurement from the front of the device or
 - Measurement from the tripod thread of the device.

Leica Disto X310 Specifications

General

Wavelength	635 nm
Laser class	2
Measurement range	0 - 120 m
Measurement accuracy	±0.001 m
Lowest indication unit	0.1 mm
Backlight	Yes
Battery type	AAA
Battery voltage	1.5 V
International Protection (IP) code	IP65
Operating temperature (T-T)	-10 - 50 °C

Weight and Dimensions

Weight	155 g
Dimensions (WxDxH)	122 x 55 x 31 mm