Need help?Do you have a question about the Leica EM FC7 and is the answer not in the manual?
General| Type | Cryostat |
|---|---|
| Motorized Advance | Yes |
| Cutting Speed | 0.1 – 99.9 mm/s |
| Control System | Microprocessor control |
| Illumination | LED |
| Display | Touchscreen |
| Dimensions (W x D x H) | 700 mm x 700 mm x 1100 mm |
| Power Supply | 100-240 V, 50/60 Hz |
| Sample Holder | Standard sample holder included |
Hazards and safe handling procedures for liquid nitrogen.
Explains common symbols and abbreviations used in the manual.
Lists and defines abbreviations used within the document.
Identifies the product model and manufacturer information.
General description of the Leica EM FC7 cryo-sectioning system.
Explains how the EM FC7 operates with the ultramicrotome.
Details features of advanced and basic touch screen controllers.
Lists all components included with the EM FC7 system.
Describes additional accessories available for the EM FC7.
Steps to prepare the UC7 or UC6 ultramicrotome for FC7 mounting.
Instructions for safely removing the EM FC7 cryochamber from its packaging.
Procedure for attaching the EM FC7 to the ultramicrotome.
Details on connecting the power supply to the cryochamber.
Instructions for connecting the liquid nitrogen hose to the cryochamber and Dewar.
Steps for connecting the EM CRION antistatic device (discharge/charge modes).
Guide on how to install the micromanipulator accessory.
Procedures for repacking the system for transport and storing manuals.
Procedures for inserting specimen holders, knives, and knife holders.
How to place the specimen into the cryo specimen holder.
Operating the antistatic device in discharge and charge modes.
Detailed explanation of controls on advanced and basic touch screen interfaces.
Guide to using the micromanipulator for grid positioning and section collection.
Instructions for unpacking and operating the cryotools set.
Procedures for refilling the Dewar, finishing work, and maintaining valves.
Comprehensive list of technical specifications for the EM FC7 system.
To Next Page
