Need help?Do you have a question about the Leica EM CPD300 and is the answer not in the manual?
General| Type | Critical Point Dryer |
|---|---|
| Applications | Sample preparation for electron microscopy |
| Chamber Material | Stainless Steel |
| Process Medium | Liquid CO2 |
| Sample Capacity | Multiple samples |
| Pressure Range | Up to 150 bar |
| Gas Used | CO2 |
| Control System | Microprocessor controlled |
| Power Supply | 230 V |
Outlines the safety concept for operating the EM CPD300 critical point dryer.
Lists general safety rules for handling the EM CPD300 critical point dryer.
Details filling, inserting, cooling, starting, and monitoring the automatic critical point drying process.
Guides through manually filling, inserting, cooling, heating, and releasing CO2.
Details setting the CO2 bottle empty pressure threshold based on CO2 temperature.
Step-by-step guide for replacing the poral filter.
Details the correct assembly direction for poral filters into the filter holder.
To Next Page
