What to do if UPS alarms while Leica Laboratory Equipment is in operation?
If the UPS alarms while the Leica Laboratory Equipment system is in operation, it's likely due to a loss of power at the outlet. You should restore wall power and reconnect the plug to resolve this issue.
How to fix Leica Laboratory Equipment when master power on UPS is turned on, nothing happens?
If the master power on the UPS is turned on but nothing happens with your Leica Laboratory Equipment, the unit might not be properly plugged into the wall. To fix this, reconnect the plug. You may need to remove the back panel to reconnect the plug securely.
Why does Leica Laboratory Equipment system alarm when master power on UPS is turned on?
If the master power on the UPS is turned on and the Leica Laboratory Equipment system alarms, it indicates a problem similar to the unit not being plugged into the wall. Because of the battery backup, the UPS alerts you to this issue. Reconnect the plug. You might need to remove the back panel to reconnect the plug.
What to do if UPS turns on, but other components of Leica Laboratory Equipment do not?
If the UPS turns on, but other components of your Leica Laboratory Equipment do not, the plug on the back of the UPS may be loose. Remove the back panel and verify all connections from the UPS to ensure they are secure.
How to troubleshoot if green light on either Engine or UPS does not turn on for Leica Laboratory Equipment?
If the green light on either the Engine or UPS of your Leica Laboratory Equipment does not turn on, first check if the switch on the back of the component is turned on. Remove the back panel and verify the switch on the engine and interface box is switched to the 'on' position. Also, ensure all plugs are properly installed.
Specifies operational mode, power requirements, and power cord details.
Identifies protection against electrical shock and device classification.
Warns about explosion risk, electrical shock, and moisture exposure.
Warns about hazardous radiation exposure and retinal damage from light.
Provides further details on phototoxicity risks and ISO 15004-2:2007 compliance.
Details high voltage hazards, operational safety, and service requirements.
Warns against operating in hazardous environments and cautions against humidity.
Explains UPS indicators and provides critical warnings on grounding and charge.
Provides step-by-step instructions for powering on the system.
Provides step-by-step instructions for powering off the system.
Offers solutions for common hardware-related issues encountered with the system.
General| Brand | Leica |
|---|---|
| Model | Envisu C Series |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
