Need help?Do you have a question about the Leica RM2255 and is the answer not in the manual?
General| Type | Rotary Microtome |
|---|---|
| Cutting Angle | Adjustable |
| Knife Holder | Standard knife holder |
| Sample Holder | Universal specimen clamp |
| Specimen Clamping | Manual |
| Section Thickness Range | 0.5 - 100 µm |
Explains various symbols used in the manual for clarity and safety.
Details requirements for operators, intended use, and instrument model information.
Provides essential safety guidelines and critical warnings for instrument use.
Describes built-in safety mechanisms like E-STOP, handwheel lock, and brake.
Identifies and labels all major parts of the microtome.
Lists the key technical features and capabilities of the microtome.
Presents detailed technical specifications including dimensions, power, and environmental limits.
Specifies placement needs and lists included items.
Guides the user through the unpacking and initial setup process.
Details how to attach the handwheel and connect power.
Introduces main controls, displays, and general functions.
Explains the specific controls and indicators on the main unit and panel.
Step-by-step instructions for powering up the microtome.
Describes the function of displays and selection buttons.
Guides on setting specimen retraction values and disabling it.
Explains how to adjust cutting speed and define the sectioning area.
Introduces manual (ROCK) and motorized sectioning modes and basic controls.
Details continuous, single, and step motorized sectioning operations.
Instructions for using the optional foot switch for control.
Covers installing specimen fixtures and orienting the specimen.
Describes how to adjust the force balance for specimen head stability.
Step-by-step guide for mounting the knife holder.
Explains setting the optimal clearance angle for the blade.
Procedures for securely holding the specimen and mounting the blade.
Instructions for trimming operations in manual and motorized modes.
Covers the main sectioning process and how to change specimens.
Details on assembling fixtures for specimen clamps.
Instructions for mounting rigid and directional fixtures.
Guide for installing the fine-directional fixture.
Steps for mounting the quick clamping system.
Instructions for using the standard clamp for rectangular blocks.
Guide for using the Vee insert with round samples.
Instructions for clamping foil pieces and flat specimens.
Steps for clamping cassettes in the UCC.
How to use the holder for cylindrical specimens.
Instructions for assembling and using the mega cassette clamp.
Details on repositioning the rigid knife holder base.
Instructions for inserting blades into knife holders E and E-TC.
Information on mounting knife holders N and NZ.
Information on available blades and knives.
Instructions for attaching the waste tray and installing backlighting.
How to use the freezer pack for cooling specimens.
Details on assembly and use of the microscope carrier.
Instructions for installing and using the magnifying lens.
Steps for connecting and using the light source and guide.
Lists part numbers for accessories.
Explains how malfunctions are indicated and how to handle error messages.
Lists common problems, their causes, and corrective actions.
Detailed guide to common issues, their causes, and solutions.
Procedures for cleaning the microtome and its components.
Recommended schedule and intervals for instrument upkeep.
Step-by-step guide for replacing instrument fuses.
Details on parts to lubricate and the recommended frequency.
Information on product warranty coverage and how to obtain support.
Guidelines for safe instrument retirement and disposal.
To Next Page
