Need help?Do you have a question about the Leica iCON robot 60 and is the answer not in the manual?
General| Working Range | Up to 600 m (with detector) |
|---|---|
| Accuracy at 30 m | ±1.5 mm |
| Communication | Bluetooth |
| Operating Temperature | -20°C to +50°C |
| Battery Life with AA | Up to 100 hours |
| IP Rating | IP66 |
| Leveling Time | Less than 3 seconds |
Details on purchasing the Leica iCON robot 60/iCON builder 60.
Information on identifying the product and its serial number.
List of trademarks associated with the product and company.
Lists other available documentation for the product.
Overview of directions for anticipating and avoiding operational hazards.
Explanation of warning messages and their importance for user safety.
Defines intended use, foreseeable misuse, and operational limitations.
Outlines responsibilities and details hazards of product operation.
Information on laser safety standards and classifications for product components.
Laser safety details for EDM with reflectors.
Laser safety details for EDM without reflectors.
Laser safety information for ATR and PowerSearch PS functions.
Laser safety details for Laser Guide and Laser Plummet features.
Laser safety details for the Laser Guide feature.
Information on electromagnetic compatibility and potential disturbances.
FCC compliance statement and guidelines for interference.
Overview of the main components that make up the iCON robot 60 system.
Explanation of software concepts and power supply options.
Information on data storage and items included in the product container.
Detailed breakdown of the instrument's physical components.
Description of the keyboard layout and key functions.
How to operate the interface via touch screen and keyboard.
Step-by-step guide for setting up the instrument in the field.
Instructions for connecting the instrument to a PC for data transfer.
Guide for remote control setup and instrument power management.
Information on battery operation, charging, and replacement.
How to operate the Laser Guide and work with memory devices.
Explanation of LED indicators and tips for accurate measurements.
Introduction to instrument checks, adjustments, and error correction.
Steps and conditions required before performing instrument checks.
Procedure for electronically determining and adjusting instrument errors.
Steps to adjust circular levels on instrument, tribrach, and prism pole.
Procedure to check the accuracy of the instrument's laser plummet.
Instructions for routine servicing and maintenance of the tripod.
Overview of machine control tools available in the software.
Configuration options for communication and sensor settings.
Procedure for adjusting paver tracks using the Atack application.
Guidelines for safely transporting the equipment in various conditions.
Recommendations for storing the instrument and batteries.
Instructions for cleaning and drying the product and accessories.
Information on motorisation inspection and maintenance schedules.
Specifications for angular measurement accuracy and resolution.
Technical data for distance measurements using reflectors.
Technical data for reflectorless distance measurements.
Specifications for the Automatic Target Aiming (ATR) function.
Technical data for the PowerSearch PS feature.
Specifications for the Laser Guide feature.
Details on product compliance with national and international regulations.
Comprehensive technical specifications for the instrument.
Information on applying scale corrections for atmospheric conditions.
Mathematical formulas used for distance and height calculations.
Terms and conditions for using the product's software.
Details regarding open-source software used in the product.
To Next Page
