What to do if Leica Rugby 620 Laser Level Rugby does not turn on?
If your Leica Rugby laser level doesn't turn on, the batteries may be low or dead. Check the batteries and replace or charge them as needed.
Why is my Leica Laser Level receiver not working properly?
If the laser receiver for your Leica Rugby is not working properly, consider these potential causes: * The Rugby may not be rotating because it is levelling or in Elevation Alert. Check the Rugby's operation. * The receiver might be out of usable range. Try moving closer to the Rugby. * The receiver batteries could be low. Replace the receiver batteries.
How to fix reduced laser distance on Leica Rugby 620 Laser Level?
If the laser distance of your Leica Rugby is reduced, dirt may be reducing the laser output. Clean the windows of both the Rugby and the receiver.
Why Leica Rugby 620 Laser Level Rugby is not self-levelling?
If your Leica Rugby laser level is working but not self-levelling, it might be in Manual Mode. To enable self-levelling, set the Rugby to Automatic Mode by pressing the Automatic/Manual Mode button. When in Automatic Mode, the X-axis LED and the Y-axis LED will flash green while levelling. In Manual Mode, the X-axis LED and/or the Y-axis LED will be red.
How to enable Elevation Alert on Leica Rugby 620 Laser Level?
If the Elevation Alert function on your Leica Laser Level is not working, it may be disabled. To enable or disable it: turn on the Rugby so it is rotating, then press and hold the Up and Down Arrow buttons. Then, press the Automatic/Manual Mode button. The Rugby will beep once to confirm the change.
What to do if Leica Rugby 620 Rugby does not switch to Manual Mode?
If your Leica Rugby laser level doesn't switch to Manual Mode and beeps three times when pressing the Automatic/Manual Mode button, Manual Mode may be disabled. To enable or disable it, turn off the Rugby, then press and hold both the Automatic/Manual Mode button and the Power button for 5 seconds. The Rugby will beep five times, followed by a longer beep to indicate the change.
General safety directions for product use and user understanding.
Details various hazards like electrocution, lightning, mechanical shock, and fire.
Classifies laser safety standards and product laser class.
Provides instructions on choosing a location and setting up the Rugby on a tripod.
Details the functions of the Rugby's control buttons (Power, Mode, Arrow).
Explains the meaning of the LED indicators for battery, axis status, and alerts.
Step-by-step procedure to check the laser's level accuracy.
Step-by-step procedure to adjust the laser's level accuracy.
Provides specifications like operating range, accuracy, dimensions, and battery life.
General| Self-leveling range | ± 5° |
|---|---|
| IP rating | IP67 |
| Working range with receiver | 800 m (2, 600 ft) diameter |
| Rotation speed | 600 rpm |
| Laser type | 635 nm |
| Power source | alkaline batteries |
| Battery life | 60 hours |
| Operating temperature | -20°C to +50°C |
| Self-leveling accuracy | ± 1.5 mm at 30 m (± 1/16 in at 100 ft) |
To Next Page
