Need help?Do you have a question about the Leica Rugby 680 and is the answer not in the manual?
General| Brand | Leica |
|---|---|
| Model | Rugby 680 |
| Category | Laser Level |
| Language | English |
Details for identifying the product type and serial number for service.
States the manual applies to Rugby 670/680 lasers and notes model differences.
Lists available documentation resources like Quick Guide and User Manual.
Overview of online services like myWorld, myProducts, myService, mySupport, myTraining.
Provides general safety rules and defines hazard signal words (DANGER, WARNING, CAUTION, NOTICE).
Outlines intended use, foreseeable misuse, and environmental limitations for safe operation.
Defines duties of the manufacturer and the person responsible for the product.
Identifies potential risks like electrocution, lightning, mechanical shock, and battery hazards.
Explains laser safety standards (IEC 60825-1) and product classification as Class 2.
Discusses EMC principles and potential interference issues with other equipment.
Provides FCC compliance information for digital devices and radio frequency energy.
Describes the Rugby 670/680 as semi-automatic lasers and their applications.
Identifies key parts of the Rugby laser unit such as carry handle, display, and buttons.
Details the components found within the product's carrying case, including receivers and batteries.
Guides on setting up the Rugby on a tripod for both level and grade modes.
Explains the functions of buttons and displays on the Rugby's user interface.
Describes the start-up and information screens displayed by the Rugby.
Step-by-step instructions for entering desired grade values for X and Y axes.
Details Elevation (H.I.) Alert, Bump Alert, and Smart Slope functions for accuracy.
Explains how to navigate and configure settings like Smart Slope, Bump Alert, and units.
Overview of the Rod Eye 140 components, including level vial, speaker, LEDs, and keypad.
Explains the functions of the Power, Audio, and Bandwidth buttons on the Rod Eye 140.
Describes how to access and navigate the menu options for the Rod Eye 140.
Overview of the Rod Eye Basic components, including level vial, keypad, LEDs, and speaker.
Explains the functions of the Power, Audio, and Bandwidth buttons on the Rod Eye Basic.
Step-by-step guide for using the Rugby to set forms accurately.
Step-by-step guide for checking grades using the Rugby and receiver.
Step-by-step guide for setting grades on slopes with the Rugby.
Information on charging, discharging, and general battery usage guidelines.
Step-by-step instructions for charging the rechargeable Li-Ion battery.
Instructions for inserting and removing Li-Ion batteries.
Instructions for inserting and removing alkaline batteries.
Procedure for verifying the laser's level accuracy against specifications.
Steps for entering calibration mode and adjusting X/Y axes for accuracy.
Step-by-step guide for calibrating the X and Y axes of the laser.
Instructions on how to save and exit the calibration mode.
Lists common alerts, their visual/audio symptoms, and possible causes.
Addresses issues like not self-levelling, power, laser reduction, and display problems.
Guidelines for safely transporting the equipment in the field, vehicles, and for shipping.
Recommendations for storing the product and batteries to maintain performance.
Instructions on how to clean lenses, prisms, and the product to prevent damage.
Declares compliance with relevant European Directives and provides a link for conformity.
Provides technical details like operating range, accuracy, dimensions, weight, and battery life.
Outlines lifetime and "three years no cost" warranty coverage and registration requirements.
Lists and describes accessories related to power supply, such as chargers and cables.
Details the available battery packs (Li-Ion, Alkaline) for the Rugby.
To Next Page
