Need help?Do you have a question about the Leica Rugby 200 and is the answer not in the manual?
General| Brand | Leica |
|---|---|
| Model | Rugby 200 |
| Category | Laser Level |
| Language | English |
Manual provides setup and operating procedures for the Rugby 200.
Identifies switches, indicators, and their functions on the Rugby 200.
Details the functions and operation of the infrared remote control.
Describes mounting the Rugby 200 on a wall for height reference.
Explains using a target to visually detect the rotating beam for grid alignment.
Features of a bracket for laydown use and wall mounting adjustments.
Information on the rechargeable battery pack, charging, and care.
Turns the unit on and off. Starts in automatic mode.
Switches between auto, manual with cross axis, and full manual modes.
Controls the head speed from 0 to 10 revolutions per second.
Selects scan areas from 10° to 180° for the rotating head.
Controls head rotation clockwise or counterclockwise.
Positions the beam directly below the aperture.
Activates Elevation Alert to prevent elevation errors.
Controls head tilt in manual mode or laydown position.
Shows status of laser leveling and beam emission.
Alerts when the laser's batteries are low.
Indicates manual mode status (cross axis or full).
Shows if H.I. Alert is on or in an alert condition.
Signals when the unit is outside its self-leveling range.
Indicates when the unit's internal temperature exceeds operating limits.
Solves problems with the unit not turning on or not self-leveling.
Addresses H.I. LED alerts and out-of-level indications.
Diagnoses issues related to temperature, battery charge, and laser output.
Troubleshoots problems with the Rod-Eye receiver and IR remote.
Step-by-step guide to installing a ceiling grid using the Rugby 200.
Instructions for operating the Rugby 200 when placed horizontally.
How to use the Rugby 200 as a reference for general construction tasks.
Procedure to verify the laser's horizontal calibration accuracy.
Steps to access the laser's calibration settings for adjustments.
Method to check the calibration when the unit is in laydown position.
Steps to adjust the laydown calibration for vertical alignment.
Guidelines for safely transporting the Rugby 200 and its accessories.
Recommendations for proper storage to maintain instrument condition.
Instructions on how to clean the laser's optical windows.
Detailed specifications including range, accuracy, power, and dimensions.
Technical details for the IR remote control.
Specs for the battery pack and charging adapter.
Details the product warranty coverage and terms.
Defines the permitted and intended uses of the Rugby 200.
Lists prohibited uses and specifies environmental operating limitations.
Outlines responsibilities of the manufacturer and users for instrument safety.
Warnings on instruction absence, wet conditions, and charger voltage.
Risks from thunderstorms, electrical installations, and charging.
Details on Class Illa laser product compliance and hazards.
Information regarding Class 3R laser product compliance and safety.
Details on Class II/2 laser product compliance and eye safety.
Explains EMC and warns about potential disturbances from accessories.
Compliance statement regarding FCC rules for digital devices.
To Next Page
