Leica Rugby 410 User Manual (English)

Questions and Answers:

J
jamie86Aug 8, 2025
What to do if Leica Rugby 410 remote will not communicate with the laser?
- R
  Randy TaylorAug 8, 2025
  If the remote is not communicating with the laser, here are a few things to check: * First, verify that the remote function is enabled on the laser itself, which is indicated by a small icon on the main display. * Check the remote battery status and replace the batteries if necessary. * Try reducing the distance between the remote and the laser. * If you are at longer distances, make sure the remote is within the line of sight of the laser. * Also, reposition the remote at a different angle to potentially improve the internal antenna reception.
K
Kimberly GomezAug 12, 2025
Why does my Leica Laser Level have a loss of distance?
- J
  John HartAug 12, 2025
  If you are experiencing a loss of distance with your laser level, consider the following: * Check the window surfaces to ensure they are clean. * Test with a different receiver to rule out receiver issues. * If you are operating at extended distances, try decreasing the head speed, as this may improve performance.
F
fdrakeAug 17, 2025
What to do if Leica Rugby 410 Laser Level grade stakes do not match the laser?
- S
  Shannon RobertsAug 17, 2025
  If the grade stakes do not match the laser, you should: * Check for proper alignment of the axes. * Verify the level accuracy of the laser. * Inspect the grade stakes themselves to confirm their accuracy and ensure they haven't moved.
B
Bonnie StoneAug 21, 2025
What to do if Leica Rugby 410 remote will not turn on?
- A
  andersonandreaAug 21, 2025
  If the remote does not turn on, check and replace the batteries.
Q
qingramAug 25, 2025
Why Leica Laser Level head rotates slowly?
- K
  Kristina BallAug 26, 2025
  If the head rotates slowly, it might be in low battery mode. In low battery mode the Rugby will rotate slowly (7 RPS) to trigger the laser low battery function on the RE Pro.
E
Erika YoderAug 29, 2025
How to save beam masking on Leica Rugby 410 Laser Level?
- J
  Jesus WilsonAug 29, 2025
  To save beam masking, set up this preference in the second set-up screen.
L
Leonard GarciaSep 2, 2025
What to do if Leica Laser Level has no beam?
- R
  Rebecca LopezSep 3, 2025
  To troubleshoot a missing beam, check with a receiver to verify.