User Manual K3C, K3M, K5C, K8 General Notes 7
Safety Instructions
Intended use
This camera system is designed for use by engi-
neers and scientists. It is a scientific measuring
instrument, which provides images.
The camera may only be used according to the
instructions of this user manual. The disclosures
and operating conditions in this user manual
must be respected. Unauthorized modifica-
tions and changes of the device are forbidden
for safety reasons.
Non-intended use
Never use the Leica microscope camera or its
components for diagnostic procedures if it is
not expressly intended for such use.
The instruments and accessories described in
this user manual have been tested for safety
and potential hazards.
The responsible Leica affiliate must be consul-
ted whenever the instrument is altered, modi-
fied or used in conjunction with non-Leica
components that are outside of the scope of
this user manual!
Unauthorized alterations to the instrument or
noncompliant use shall void all rights to any
warranty claims.
Place of use
O Electrical components must be placed at
least 10 cm away from the wall and from
flammable substances.
O Avoid large temperature fluctuations, direct
sunlight and vibrations. These conditions
can distort the functionality of the camera.
O In warm and damp climates, the individual
components require special care in order to
prevent the build-up of fungus.
Responsibilities of person in charge of
instrument
Ensure that:
O The Leica microscope camera and accesso-
ries are operated, maintained and repaired
by authorized and trained personnel only.
O All operators have read, understood and
observe this user manual, and particularly
the safety regulations.
To Next Page
Loading...
