231
Precautions and care instructions
MONITOR
The monitor is manufactured using a high-precision process. This
ensures that of the total of more than 921,600 pixels only a very
small number will not work correctly, i.e. remain dark or always be
lit. However, this is not a malfunction and it does not impair the
reproduction of the picture.
• If the camera is exposed to significant temperature fluctuations,
condensation can form on the monitor. Wipe it carefully with a
soft dry cloth.
• If the camera is very cold when it is turned on, the displays may
at first appear darker than usual. As soon as it warms up, it will
reach its normal level of brightness.
SENSOR
• Cosmic radiation (e.g. on flights) can cause pixel defects.
CONDENSATION MOISTURE
• If condensation has formed on or in the camera, you should turn
it off and leave it to stand at room temperature for around an
hour. Once the camera temperature has adjusted to room
temperature, the condensation will disappear by itself.
To Next Page
Loading...
