Leica M9 - Setting Menu Functions

120 / Setting the menu functions
Setting the menu functions
1. The main menu is called up using the MENU button
(1.28); the image parameters menu using the SET
button (1.21).
• The first 7 items then appear in the main menu
(or all 5 in the snapshot profile) and all items in
the image parameters menu.
Notes:
• The image parameters menu is
– only accessible in picture mode (see p. 113), and
– only available when using aperture priority (see
p. 136) and manual (see p. 140) exposure modes,
but not with the snapshot profile.
• The main menu is not accessible during the
DELETE or protect process (see p. 153/154).
2. You can select the desired menu item either by
turning the setting dial (1.29) or by pressing the
up/down direction button (1.30).