What to do if display flashes on Leica RANGEMASTER 1200 scan Measuring Instruments?
If the display of your Leica Measuring Instruments flashes, or if no measurement is possible, it is likely due to a flat battery. Replace the battery to resolve this issue.
Why does Leica RANGEMASTER 1200 scan Measuring Instruments display “---” when measuring distance?
The “---” displayed when measuring distance with Leica Measuring Instruments usually indicates that the object is either out of operating range or there is insufficient reflection from the object. Consult section “Operating range and accuracy”.
How to fix a blurry target mark on Leica RANGEMASTER 1200 scan?
If the target mark is not sharp when using Leica Measuring Instruments, it may be because the diopter compensation was not perfectly adjusted. Repeat the diopter compensation adjustment to correct this.
How to get a clear view with Leica RANGEMASTER 1200 scan?
If you cannot get a truly round view without blurred edges on your Leica Measuring Instruments, the position of the eyecup may be incorrect. Ensure that spectacle frames are not distorting the view or that the eyecup is folded up if you are not wearing glasses.
General| Brand | Leica |
|---|---|
| Model | RANGEMASTER 1200 scan |
| Category | Measuring Instruments |
| Language | English |
Multilingual instructions to verify the correct measuring unit (meter/yard) is set before use.
Diagram and list identifying all external parts of the Leica Rangemaster device.
Introduces the LEICA RANGEMASTER 900 scan and 1200 scan models.
Instructions on how to securely attach the provided wrist strap to the device.
Step-by-step guide for inserting the 9V battery into the compartment.
How to interpret the display for battery voltage levels.
Instructions on how to switch between meters and yards display.
Guide for adjusting the eyecup for use with or without spectacles.
How to adjust the diopter for sharp target mark focus.
Procedure for targeting and measuring the distance to an object.
How to activate and use the continuous measurement (scan) mode.
Solutions for problems like blurred views, target mark issues, or no measurements.
Key technical data including range, accuracy, magnification, and dimensions.
Information on practical training courses offered by Leica Academy.
Details on accessing product information via the website and info service.
To Next Page
