EN
161
Review mode
Notes:
• An HDMI cable is required to connect to a TV, monitor or projector.
Only use the model supplied by Leica for this camera (see p. 167).
• If the connected TV, monitor or projector has a lower maximum
resolution than that set on the camera, it automatically switches to
the maximum resolution of the connected device. For example, if
you have set 1080i on the camera but the connected device only
has a maximum resolution of 480p, the camera changes the
setting automatically.
• For details of the required settings, refer to the instructions for the
respective TV, projector or monitor.
• The image reproduced on an external display does not contain any
of the information shown in the camera monitor / viewfinder.
To Next Page
Loading...
