Leitch X75SD - Page 12

12 X75 Quick Start Guide
X75SD/X75HD Multiple Path Converters and Frame Synchronizers Quick Start Guide
c. Press Enter to move to the next item in the octet, and then repeat step b above.
d. Press Exit when you are finished configuring the address.
5. Scroll to the Subnet Mask parameter, and then press Enter.
If this is a new unit being configured, the default subnet mask displays. Otherwise,
the current subnet displays.
6. Repeat the procedure described in step 4.
7. Locate and scroll to the Gateway parameter, and then press Enter.
If this is a new unit being configured, the default gateway displays. Otherwise, the
current gateway address displays.
8. Repeat the procedure described in step 4.
9. Select Save IP, and then press Enter.
Select Yes and then press Enter.
11. Press Exit to return to the Setup menu.
12. Navigate to the Setup menu, select Reboot, and then press Enter.
To restart an X75HD/SD unit with a blank front panel, unplug it and then reapply
power.