LEITZ iLAM TOUCH A3 - Intended Use; Technical Specifications; For Your Safety

1
EN
Intended use
This Leitz product is intended to be used for laminating paper or similar
materials. The product should only be used in household or similar
environments, such as in ofces and shops. The product should not be used
for commercial or industrial purposes, in locations with the presence of a
corrosive or explosive atmosphere or for medical purposes. The product may
only be used according to the instructions as described in this manual. All use
other than described in this manual is seen as unintended use.
Technical specications

Touch A3 Turbo A3 Turbo Pro A3
Rollers / Style 6 rollers / Carrier
Free
6 rollers / Carrier
Free
6 rollers / Carrier
Free
Speed 1000 mm/min 1500 mm/min 2200 mm/min
Warm-up time Approx. 60 sec for
80 µm
Approx. 60 sec for
80 µm
Approx. 60 sec for
80 µm
Pouch thickness
range
75 – 250 µm 75 – 250 µm 75 – 250 µm
Max paper
thickness
0.6 mm 0.6 mm 0.6 mm
Entry width 320 mm A3 320 mm A3 320 mm A3
Dimensions
(LxWxH)
482 x 117 x 191 482 x 117 x 191 482 x 117 x 191
Ambient
conditions for
operation/storage
0 °C~40 °C; 10 %~95 % relative humidity
For your safety
WARNING! Read all safety
warnings and all instructions.
• Please take the time and read
the general safety instructions.
You can nd the general safety
instructions in a separate booklet.
This booklet is included.
• If the product is not installed and
used in accordance with this
manual, it may cause harmful
interference with radio or television
reception or affect other electronic
devices in residential areas.
Non-compliance invalidates the
permission to operate this product.
• Ensure good aeration while
laminating (e. g. open a window).
• Do not place anything on top of the
device and do not insert anything
into the venting slots.
• Unplug and let the device cool
down before cleaning, moving
or storing it. When carrying the
laminator, always hold it by the
recessed grips on both sides.