Need help?Do you have a question about the Lekker X and is the answer not in the manual?
General| Brand | Lekker |
|---|---|
| Model | X |
| Brakes | Hydraulic Disc Brakes |
| Saddle | Comfort Saddle |
| Max Load | 120 kg |
| Frame Material | Aluminum |
| Wheelset | Aluminium |
| Drivetrain | Shimano |
| Handlebar | Aluminium |
Visually inspect the bicycle for any damage after removing it from the box.
Carefully remove the e-bike from its packaging, noting its heavier weight.
List of necessary tools including spanners, Allen keys, grease, and pump.
Position the front fork and stem correctly for initial setup.
Mount and tighten the handlebar to the stem plate with correct torque.
Adjust brake levers and gear shifter for optimal rider comfort and access.
Modify the handlebar stem angle for personalized riding position.
Install pedals ensuring correct thread direction and applying specified torque.
Check and adjust the gear selector housing for precise gear changes.
Inflate tires to the recommended pressure for safe riding.
Test brake levers to ensure proper operation and no rubbing sounds.
Calibrate disc brakes for optimal clearance and performance.
Adjust the saddle height and angle for comfortable cycling.
Steps to power on the bike and select assist modes.
Charge the battery for 12 hours for the first three cycles.
Perform final checks on pedals and bolts before commencing your ride.
Initial 12hr charging for the first three cycles to ensure capacity.
Keep the two provided battery keys safe as replacements are unavailable.
Store battery at 60% charge in a cool, dry place for long periods.
Ensure battery is removed and bike is covered when storing outdoors.
Avoid charging in high humidity areas to prevent electric shock.
Do not insert wet plugs; dry them completely before use.
Ensure battery and charging cables are disconnected prior to repairs.
Information on the 2-year warranty for battery defects.
Avoid water exposure to battery terminals to prevent overheating.
High temperatures accelerate battery ageing; avoid direct sun exposure.
Use assist modes judiciously to extend battery lifespan.
Be aware of surroundings and potential loss of control on loose surfaces.
Adhere to helmet laws and recommended light usage for visibility.
Pedelec e-bikes must comply with 250W output and 25km/h assist limits.
Service your e-bike every 4-6 months by a trained mechanic.
Avoid unauthorized modifications to prevent damage, safety risks, and warranty voiding.
Unlock the battery with the key and pull the lever to release it.
Insert the battery into the frame, sliding until it clicks securely.
To Next Page
