EN-17
- Grease the gears in the rake wheel gearboxes every 8 working
hours (fig. 18).
Continue turning the rake wheels bit by bit to ensure the grease
is distributed effectively all over the gears.
- Grease the hinges of the swivel wheels every 40 working hours
(fig. 19).
- Grease the guide slot in the headstock (fig. 20) on a regular basis.
- Grease the telescoping tubes between the swath boards on a
regular basis.
- Locking pins, tine hinges and other pivot points must be
lubricated regularly to prevent corrosion.
To Next Page
Loading...