LELY Splendimo 321 PC - Supplement A Repairs to the Cutter Bar

A REPAIRS TO THE CUTTER BAR
A.1 Cutter bar assembly/disassembly
The figures placed between brackets correspond with the
numerals in figure A-1.
The cutter bar is built up of independent units (1). These
mower elements are kept apart by intermediate spacers (2).
The units and spacers are kept together by a connecting rod
(3).
The cutting units are driven from the drive element (4) by a
drive shaft (5).
Thanks to the modular design, mower elements can be
replaced quickly, as can the drive shaft.
If so required, the sequence of elements with LH and RH
rotation can be changed in the SPLENDIMO PC with “S”
model mower discs.
47
Supplement A
A-1
4
12
14987
11
10
13
6
12
5
3