LEM FX22 - LEM FX 22 Technical Specifications; Input, Output, and DSP Specifications; Features and General Specifications

20
FX
22
Technical specifications
Technical specifications
Connectors 2 x JACK 1/4" unbalanced
Input sensitivity 0 dB / 0.775 V
Max. input level +12 dB
Impedance 47 kOhms
Connectors 2 x JACK 1/4" unbalanced
Nominal output level 0 dB
Max. output level +12 dB
Impedance 1 kOhms
A/D converters 20 bit
D/A converters 24 bit
Internal dynamics 40 bit
Sampling frequency 48 kHz
Configurations DUAL STEREO / COMBI
Type of effects Hall, Room, Vocal, Plate & Gate Reverbs - Delay - Chorus - Flanger - Phaser - Rotary
Presets 121 + 121
Controls
PRESET BANK & VARIATIONS selectors
DUAL/COMBI selector
MIX & OUTPUT controls
LED PEAK & POWER ON
MUTE FOOTSWITCH connector
Frequency response 20 Hz - 20 kHz
Dynamic range 102 dB
Distortion (THD) 0.06% @ 1 kHz (dry)
Power supply AC/DC ADAPTER 12V / 600 mA
Dimensions 210 x 40 x 170 mm (WxHxD)
Weight 1.2 kg
Features
General Specifications
INPUT section
OUTPUT section
DSP section