Need help?Do you have a question about the LEM DX 24 and is the answer not in the manual?
Proper connection to the power source.
Safe procedures for powering the unit on and off.
Tips to avoid electrical and RF interference.
Guidelines for protecting the unit from damage.
Procedures to follow in case of equipment malfunction.
Importance of retaining the user manual.
Selects between PRESET, DELAY, EDIT, UTILITY menus.
Show the status of selected menus and functions.
Shows menu information and parameter values.
PREV/NEXT for pages, Cursor for parameters.
Adjusts parameter values.
Accesses editing pages and confirms values.
Exits editing pages and cancels changes.
Visual display of input signal levels.
Visual display of output signal levels.
Mutes individual audio outputs.
XLR-F connectors for audio inputs.
XLR-M connectors for audio outputs.
MIDI IN, THRU, OUT for communication.
Unit's main ON/OFF control.
Connection for the mains power supply cable.
Prerequisites and initial considerations.
How to use menus and adjust parameters.
Setting up input/output routing.
Optimizing input gain for signal quality.
Step-by-step guide for initial configuration.
Understanding the main screen display.
Explanation of input/output assignments.
Details on preset numbering, types, and naming.
Temporary changes and system security.
Overview of PRESET menu functions.
Overview of DELAY menu functions.
Overview of EDIT menu functions.
Overview of UTILITY menu functions.
Explains how parameters are displayed.
How to select and load saved settings.
Saving current settings as a new preset.
Copying presets between units via MIDI.
Accepting or ignoring incoming preset data.
Technical distinction between input/output delays.
Setting delay for input signals.
Setting delay for output signals.
Adjusts amplification of input signals.
Adjusts tone of input signals with 5 parametric filters.
Divides audio signal using LP/HP filters.
Adjusts tone of output signals with 5 parametric filters.
Adjusts signal level of individual outputs.
Inverts the phase of individual output signals.
Protects components by limiting output levels.
Groups similar inputs/outputs for simultaneous editing.
Selects units for Delay, Limiter, Temperature.
Configures output meters, temperature, display.
Sets ambient temperature for sound speed compensation.
Sets output mute status on startup.
Adjusts display screen contrast.
Enables/disables protection with a password.
Unlocking the system protection.
Configures MIDI communication.
Sets channel for receiving PC commands.
Sets channel for sending PC commands.
Scheme for connecting balanced XLR inputs.
Scheme for connecting balanced XLR outputs.
Standard MIDI cable configuration.
To Next Page
General
