LEM DX 24 - Temperature Compensation; Wake Up Mode Configuration; LCD Contrast Adjustment

42
Temperature
Allows to key in the value of the environmental temperature of place of installation.
The system uses this value to automatically compensate for the differentials due to the difference
speed of sound transmission according to the air temperature.
This allows to set the delays during the sound-check and only have to reset them automatically
when necessary (for example during a concert, in the event of big jumps in temperature, etc.).
The editing values are in the following ranges: +60°C ÷ -30°C with 1°C steps
140.0°F ÷ -22.0°F with 1.8°F steps
Tem
p
erature
20°C
Tem
p
erature
68.0°F
N.B.: the measurement units can be chosen between °C (degrees Centigrade) and °F (degrees Fahrenheit) by means
of the Temperature Unit function (UTILITY menu - Units submenu).
Wake Up
Allows to choose the mode in which MUTE functions are restored when the DX 24 is switched
on.
The options include:
Normal Mute
when switched on, the system restores the last when switched on, the system automatically
MUTE configuration before switching off sets all the outputs in MUTE
Wake U
p
Normal
Wake U
p
Mute
LCD Contrast
Allows to adjust the Display contrast.
The values are in the following range: 0 (minimum contrast) ÷ 32 (maximum contrast).
LCD Contrast
26
UTILITY menu